Inquiry
  • Home
  • About us
  • Products
      • Acetic Acid
      • Aluminium Sulphate
      • Caustic Soda
      • Carbon Black
      • Calcium Bromide
      • Diatomaceous Earth
      • Ferric Chloride
      • Magnesium Chloride
      • Manganese Sulphate
      • Monochloroacetic Acid
      • Polyanionic Cellulose
      • POLY ALUMINIUM CHLORIDE
      • Sodium Bromide
      • Sodium Hexameta Phosphate
      • Sodium Carboxymethyl Cellulose
      • Tri Sodium Phosphate
      • TITANIUM DIOXIDE
      • Alpha Cellulose Powder
      • Microcrystalline Cellulose Powder
      • Agar Agar Powder
      • Sorbitol 70%
      • Stevia Powder
      • Tapioca Starch Powder
      • Maize Starch
      • Moringa Leaf Powder
  • Quality Policy
  • Certification
  • Career
  • Contact us
  • Home
  • About us
  • Products
  • Quality Policy
  • Certification
  • Career
  • Contact us

ISO 9001 Certificate

Halal Certificate

FSSAI Certificate

Kosher

Download Brochure

Copyright @ 2021 Purple Crayon India All Rights Reserved

Microcrystalline Cellulose Powder

We have collaborated with reputed manufacturers of Microcrystalline Cellulose Powder. Micro crystalline cellulose is a term for refined wood pulp and is used as a texturizer, an anti-caking agent, a fat substitute, an emulsifier and a bulking agent in food production. The most common form is used as vitamin tablets.

For its manufacturing, cellulose, collected from fibrous material, undergoes controlled hydrolysis with dilute mineral acid. It has high absorbent powers, and can be used as a suspending agent, tablet disintegrant and tablet & capsule diluent.

Features :

  • Used for Thickening
  • Bonding
  • Emulsifying
  • Dispersing
  • Stabilizing
  • Preserving water

Polyanionic Cellulose

PAC is a kind of nonionic cellulose ether featured the properties of high purity, high DS, particularly high viscosity or low viscosity. These products are demi-natural polymer additive, thickening agent, filtrate reducer.

PAC is an indispensable product for drilling mud making. It is high purity product; the water solution of this white powder is transparent and viscid. As water-soluble polymer, PAC dissolves immediately in cold/hot water and can be used as a thickening agent, rheology controller, bond, stabilizer, colloid protector, suspending agent, and filtrate reducer.

PAC is a good drilling mud additive and also an important material for confecting well liquid, a high mud volume product that featured high acid-resistance and salt-resistance ability. PAC is a good filtrate reducer with the capacity of increasing viscosity and anti-high temperature (150°C) in the freshwater, seawater, or even saturated brine well-completion liquid. PAC is suitable for confecting the completion fluid with these 3 kinds of water above.

Properties :

Physical : It occurs as a white-to-cream colored powder or granules. It is hydroscopic and insoluble in most solvents. The powder will be nearly odorless and transparent in solution.

Solubility : PAC is a water-soluble polymer soluble in either hot or cold water. It is insoluble in organic solvents but will dissolve in miscible solvents as ethanol or acetone. It is highly salt tolerant. PAC viscosity will not increase with temperature.

Viscosity : Viscosity ranges are from low to high with any desirable viscosity in between. Most concentrations are based on 2% KCI solution (the preparation of fracturing fluid must be added) and dissolution performance. With ease of use with on site preparation and with a fast gel enables the ability of the product to carry sand. Point of complete hydration is achieved faster with finer mesh grades but care in dispersion is required.

Calcium Bromide

Calcium Bromide service is a non particulate gel system that combats fluid losses in wells where Calcium Bromide or other heavyweight brines are used as completion or work over fluids. Calcium Bromide service system can be formulated at densities from 15.5 to 18.5 lb/gal. It is effective at temperatures between 75° and 215°F (24 to 102°C).

We offer Calcium Bromide in powder and liquid form.

Application :

  • Used as dense aqueous solutions for drilling fluids
  • Useful as an oxidizer for mercury emissions control
  • As neurosis medicine
  • Freezing mixtures
  • Photography
  • Food preservation
  • Extinguishing fires
  • Beverage industry

Sodium Bromide

Sodium bromide powder is also identified as Trisodium Tribromide, Bromnatrium, Bromide Salt of Sodium or Sedoneural. It is very useful as chemical intermediate for the formulation of chemicals and bromides.

We offer Sodium Bromide in powder and liquid form.

Application :

  • Photography
  • Water Treatment & Water Clarification
  • Hypnotic Medicine
  • As Anticonvulsant
  • Sedative Medicine
  • For Disinfecting for Swimming Pools in combination with Chlorine

Moringa Leaf Powder / Tablets

The Moringa Oleifera tree is native to the Himalayan Mountain region. Natives have relied on it as an essential food and natural medicine source for centuries. Ground up into a powder, the organic Moringa leaf powder is packed with 92 nutrients, 46 different antioxidants, 18 amino acids (includes all 9 essential amino acids) and a range of vitamins, minerals & its anti-inflammatory. It is the most nutrient part of this “Miracle Tree”. We can also offer Moringa Leaf Tablets.

Properties :

Smell : Earthy fresh, Forestry

Texture : Soft powdery, smooth, fresh

Color : Bright Green

Stevia Green Powder

Sugar Free Green is made from 100% natural Stevia leaves, which are naturally sweet. Satisfy your sweet cravings, with the same sweetness but with Zero calories.

It is used as a non-nutritive sweetener and herbal supplement. A non-nutritive sweetener is one that contains little to no calories.

Stevia‐based sweeteners offer a combination of favourable attributes for a dietary supplement: low calorie and high intensity. The major application of Stevia extracts and stevioside is their use as a sweetener and dietary supplement; this covers all aspects of artificial sweeteners (non‐sucrose) such as saccharin, aspartame, etc., as well as where sugar is used. It can be used to enhance palatability of food & drinks. It can be also used for toothpaste & some cosmetic applications. Apart from the sweet content, Stevia rebaudiana constituents also offer therapeutic benefits, having antihyperglycaemic, antihypertensive, anti-inflammatory, antitumour, antidiarrhoeal, diuretic and immunomodulatory effects.

Magnesium Chloride Hexahydrate (Crystals/Flakes)

Stellar Exports Offers Magnesium Chloride Hexahydrate in Technical, Pure & LR Grades.

Magnesium chloride is most commonly used for dust control and road stabilization. Its second-most common use is ice control. In addition to the production of magnesium metal, magnesium chloride also is used for a variety of other applications: fertilizer, mineral supplement for animals, wastewater treatment, wallboard, artificial seawater, feed supplement, textiles, paper, fireproofing agents, cements and refrigeration brine.

Specifications Crystals Flakes
Formula MgC12-6H2O MgC12-6H2O
Appearance White Crystals White Flakes
Purity as MgC12.6H2O 99.5% Min 99% Min
Sulphate 1.01% Max 0.5% Max
pH value 4.5-7.0 4.5-7.0
Arsenic 2 ppm max 2 ppm max
Bromide 500 ppm max 500 ppm max
Iron 10 ppm max 25 ppm max
Calcium 0.1% max 0.7% max
Molecular Weight 203.3 203.3
Heavy Metals 1 ppm max 5 ppm max

Maize Starch

Stellar Exports offers Maize Starch that is food & and industrial grade.

One of the most important cereal starches in the world is maize starch. And, in a lot of countries, it is considered one of the staple foods. A white, tasteless, odourless carbohydrate extracted from the kernels of corn or maize, maize starch power is widely used as a stiffening agent and a thickener with many industrial applications.

Industry Wise Applications of Maize Starch

Maize starch powder has a wealth of uses across a variety of industries. From paper, to adhesives and food, this versatile starch is an important part of many industries’ manufacturing processes.

  • Food And Beverage Industry
  • Paper Industry
  • Textile Industry
  • Bioplastics
Maize Starch Powder – Food Grade
S.No CHARACTERISTICS SPECIFICATIONS
1. Moisture content, Percent by mass, Max 12.50
2. Total Ash, (on dry basis) Percent by mass, Max 0.20
3. Acid insoluble ash (on dry basis)percent by mass, max 0.10
4. Starch (on dry basis) Percent by mass, Min 98.00
5. Protein (N X 6.25), (on dry basis) Percent by mass, Max 0.60
6. pH of 10% aqueous solution 4.5 – 7.0
7. Alcoholic Acidity (expressed as h2so4), with 90 percent alcohol, max 0.25
8. Particle size 80 Mesh Powder
9. Microbial limit tests 80 Mesh Powder
E.coli Absent
Salmonellae Absent
Maize Starch Specifications
S.No CHARACTERISTICS SPECIFICATIONS
1. Description Fine white powder, odourless, Taste slight and characteristic
2. Identification To compare favorably with the Photomicrograph of Maize Starch
3. Moisture content, Percent by mass, Max 13.00
4. Protein (N X 6.25), (on dry basis) Percent by mass, Max 0.60
5. Cold water soluble, (on dry basis) Percent by mass, Max 0.40
6. pH of 10% aqueous solution 4.5 – 7.0
7. Free Acidity, Max(ml of 0.1N NaoH/100gm 40
8. Starch (on dry basis) Percent by mass, Min 98.00
9. Viscosity on Red wood Viscometer No.1, Seconds (2% solution at 750C), Min 30
10. Total Ash, (on dry basis)Percent by mass, Max 0.25
11. Particle size 80 Mesh Powder
12. Petroleum-hydro-carbon Extractable matter, (on dry basis) Percent by mass, Max 0.25
13. So2 PPM, Min 80
14. Brightness, Min 90
Maize Starch Powder - Textile Grade
S.No CHARACTERISTICS SPECIFICATIONS
1. Description Fine white powder, odourless
Taste slight and characteristic.
2. Identification To compare favorably with the Photomicrograph of Maize Starch.
3. Moisture content, Percent by mass, Max 13.00
4. Protein (N X 6.25), (on dry basis) Percent by mass, Max 0.60
5. Cold water soluble, (on dry basis) Percent by mass, Max 0.40
6. pH of 10% aqueous solution 4.5 – 7.0
7. Free Acidity, Max(ml of 0.1N NaoH/100gm 40
8. Starch (on dry basis) Percent by mass, Min 98.00
9. Viscosity on Red wood Viscometer No.1, Seconds (2% solution at 750C), Max 30-32
10. Total Ash, (on dry basis)Percent by mass, Max 0.25
11. Particle size 80 Mesh Powder
12. So2 PPM, Max 80

Alpha Cellulose Powder

Stellar Exports offers High Quality Alpha Cellulose Powder with Excellent Flow ability & Better Compressibility.

Alpha cellulose as an effective filter media has been well established and accepted for brine filtration with the advent of membrane cell technology. To protect these sensitive membranes from impurities found in the brine, the salt solution is first clarified with a precoat filter and ion exchanger. This filter aid cellulose has versatile advantages, is technically economical, and is Eco-friendly too, since it is biodegradable. Polishing of brine is necessary to remove the solid impurities even less than 0.3 micron with the help of the filter aid coating on filters.

Chemical & physical properties Specification
Cellulose content, % by mass, NLT 99
pH 5-7
Moisture, % by mass, NMT 7
Residue on ignition 2h-850 oC,% NMT 0.5
Ether soluble substances, % by mass (on dry basis) NMT 2
Bulk Density, g/liter 150-200
Passing 100 BSS, % NLT 55

Sorbitol 70%

Sorbitol, a polyol (sugar alcohol), is a bulk sweetener found in numerous food products. In addition to providing sweetness, it is an excellent humectant and texturizing agent. Sorbitol is about 60 percent as sweet as sucrose with one-third fewer calories. It has a smooth mouthfeel with a sweet, cool and pleasant taste. Sorbitol has been safely used in processed foods for almost half a century. It is also used in other products, such as pharmaceuticals and cosmetics.

Uses:
  • Oral Care & Cosmetics: Toothpaste, Mouthwash, Creams, Ointments, Lotions, Shaving Creams & Shampoo
  • Pharmaceuticals: Liquid Syrups , Suspensions & Soft Gel Capsules
  • Food & Beverage: Candies, Energy drinks / Diet Chocolates, Biscuits Cakes & Pastries, Chewing Gums,Enzymes, Ice Creams, Fruit Jams & Ha
  • Industrial Applications: Vitamin ‘C’, Sorbitol (D-Glucitol) Esters, Polyether Polyols for Rigid Polyurethane Foams, Alkyd Resins, Melamine & Phenolic Resins
  • Others: Tobacco, Papers, Explosives, Mortars & Concrete
Sorbitol Solution 70% B.P.
CERTIFICATE OF ANALYSIS
Sorbitol Solution 70% B. P.
Non-Crystalline Grade Crystalline Grade
Sr. No. TESTS LIMITS LIMITS
1 Appearance Clear, Colorless, Syrupy Liquid, Miscible with water Clear, Colorless, Syrupy Liquid, Miscible with water
2 Identification A - The principle peak in the chromatogram obtained with the test solution is similar in retent on time to the principle peak in the chromatogram obtained with reference solution (a) A the principle peak in the chromatogram obtained with the test solution is similar in retent on time to the principle peak in the chromatogram obtained with reference solution (a)
B - Angle of rotation is + 1.5 to +3.5 B - Angle of rotation is + 0.0° to +1.5°
C - It is clear, Syrupy Liquide at a temp. of 25° C C - It is clear, Syrupy Liquide at a temp. of 25° C
3 Reducing sugars after hydrolysis Maximum 9.3% Maximum 3%
4 Lead Maximum 0.5 ppm Maximum 0.5 ppm
5 Nickel Maximum 1 ppm Maximum 1 ppm
6 Water Between 28% to 32% Between 28% to 32%
7 Assay
A. D-glucitol (on anhydrous basis) Between 72% to 92% Between 92% to 101%
B. Assay (as anhydrous sub.) Between 68% to 72% Between 68% to 72%

Caustic Soda

Stellar Exports offers High Purity Caustic Soda Flakes , Prills & Lye.

Caustic soda (sodium hydroxide) is a versatile alkali. Its main uses are in the manufacturing of pulp and paper, alumina, soap and detergents, petroleum products and chemical production. Other applications include water treatment, food, textiles, metal processing, mining, glass making and others.

Below are the specs for Caustic Soda Lye.

Caustic Soda liquid: concentration 48- 50%
No Quality Characteristics UNITS Specification
Min Max
1. Specific Gravity at 40°C - 1.49 -
2. Sodium Hydroxide Wt% 48 50
3. Sodium Hydroxide g/l 710 -
4. Iron (as Fe) ppm - 5
5. Sodium Chloride ppm - 100
6. Nickel ppm
Caustic Soda liquid: concentration 32%
No Quality Characteristics UNITS Specification
Min Max
1. Sodium Hydroxide Wt% 31 33
2. Sodium Hydroxide g/l 411 444
3. Sodium Carbonate Wt% - 0.15
4. Sodium Chloride ppm - 35
5. Iron (as Fe) ppm - 3
6. Sodium Sulphate ppm - 5.0
CAUSTIC SODA PRILLS
Sr No Characteristics Specification
1. Sodium Hydroxide (as NaOH) Dry basis % 99.40 min
2. Sodium Carbonate (as Na 2 CO 3 ) % 00.60 max
3. Chloride (as Cl - ) % 00.02 max
4. Iron (as Fe+++) ppm 10.00 max
5. Nickle (as Ni) ppm 5.00 max
6. Particle Size (nominal) mm 0.7 to 1.1

Sodium Hexameta Phosphate

Sodium Hexameta Phosphate (SHMP) is a mixture of polymeric Meta phosphates of which the Hexamer is one. It is prepared by heating Monosodium Orthophosphate until it starts melting and the process is followed by rapid cooling.

Application :
  • Sodium Hexameta Phosphate is widely used in water softeners & detergents
  • Sodium Hexameta Phosphate is also used in leather tanning, dyeing, laundry work and textile processing
  • SHMP is used in process called ‘threshold treatment’ which is softening of industrial water supplies
  • SHMP is used as a sequestrant and as a food additive

Specifications :

Product Name : Sodium Hexameta Phosphate (SHMP) Anhydrous

IUPAC Name : -

Molecular Formula : Na6P6O18

Molecular Weight : 611.77

Appearence : White Powde

PH Range (1% w/v) : 6.0 to 8.0

Assay % / Purity % (minimum) : -

P2O5 content % (minimum) : 62.00

‘Na’ Content % (minimum) : 21.00

Iron as ‘Fe’ content % : 0.02

Chloride as ‘Cl’ content % : 0.2

Sulfate as ‘SO4’ content % : 0.03

Diatomaceous Earth

Catering to the needs of the clients, we offer Diatomaceous Earth. Also known as diatomite or kieselgur, Diatomaceous Earth is a naturally occurring, soft, siliceous sedimentary rock that can be easily crumbled into a fine white to off-white powder. Used in various industries, our Diatomaceous Earth is high on demand in the market. With its excellent properties, the cost-effectiveness of the Diatomaceous Earth acts as an add-on for the clients.

Application :
  • Paint industry
  • Rubber industry
  • Ceramic industry
  • Plastic industry
  • Mosaic Tiles
  • Paper Insulation
  • Fertilizer industry
  • Pigment and Synthetic Pigment industry
  • Pest control
  • Agriculture

 Diatomaceous Earth
Color Light yellow Yellow or white White White
H2O% ≤1 ≤1 ≤1 ≤1
Bulk Density (g/cm3) 0.42 0.42 0.42 0.45
Loss on ignition ≤1 ≤1 ≤1 ≤1
pH 6-8 8-10 9-11 9-11
SiO2(%) ≥85% ≥85% ≥85% ≥85%
Al2O3 (%) ≤5 ≤5 ≤5 ≤5
Fe2O3 (%) ≤1.8 ≤1.8 ≤1.8 ≤1.8
Penetration Coefficient 0.1-0.3 0.8-1.2 1.5-3.5 4.0-6.0
Wet Density (g/cm3) ≤0.40 ≤0.37 ≤0.35 ≤0.33
150m residue (%) 0-1 0-3 1-6 8-15
320m Residue (%) 0-3 1-5 18-25 30-40

TITANIUM DIOXIDE

Stellar Exports introduces two types of Titanium Dixoide Products. These products are available in Rutile And Anatase Grades and are used in various industries including, inks, dyestuff, paints, plastic and many others.

TITANIUM DIOXIDE(RUTILE GRADE)

Titanium Dioxide is a  high quality Rutile Grade Titanium Dioxide used in Paints, Plastics, Ink, Textiles etc. It is an excellent high grade rutile titanium dioxide pigment designed with good gloss, excellent opacity, easy dispersion and nice whiteness.

Application :
  • It is recommended for evaluation in both interior and exterior painting.
  • Solvent and water painting.Both interior and exterior painting.
  • Masterbatch, plastic, PVC.
  • Inks, leather, rubber, textiles etc.

Typical Properties
TiO2 Content ≥ 94 %
Organic Treatment Yes
Inorganic Treatmen Yes
Specific Gravity (g/cm3) 4.1
Oil Absorption (g/100g) ≤ 23
pH Value 6.0 - 8.5
Residue on sieve of 45 µm (m/m) ≤ 0.05%
Classifications
ISO 591 R2
ASTM D-476-00 Type II
CAS number 13463-67-7
Color Index 77891 Pigment White 6
TITANIUM DIOXIDE  (ANATASE GRADE)

Titanium Dioxide  Anatase is a High Quality Grade Titanium Dioxide used in Paints, Plastics, Textiles, Soap etc.

It is an Anatase Titanium Dioxide pigment manufactured on the basis of advanced technology. It is actively treated with unique surface dispersion technology by adding inorganic additives which can reduce the surface force between the particles of titanium dioxide, enhance the powder dry flow ability, greatly improve the dispersion properties. It is a high cost effective product aiming at the demand of market with good dispersion, good whiteness, high hiding and tinting strength, low oil absorption.

Item Specs
Active TiO2 Content % ≥ 98% (98% min)
Color 95%min
?L*(sample-standard sample) ≥ -0.3
?s=(?a2+?b2)0.5 ≤ 0.5
Matter volatile at 105oC % ≤ 0.6
Matter soluble in water % ≤ 0.5
Residue on sieve 45µm % ≤ 0.1
PH of aqueous suspension 6.0-8.5
Oil Absorption g/100g ≤ 26
Tinting strength % ≥ 100
Identification
Colour Index 77891 Pigment White 6
CAS No. 13463-67-7
EINECS No. 236-675-5
DIN ISO 591
ASTM D476-84 I
Appearance White Fine Powder
Powder Odour None

Carbon Black

Stellar Exports has successfully launched and marketed its speciality carbon black range that are high-performance and cater to niche applications in plastics(food and non-food grade), fibre, coatings and inks, among others. They are commonly used in inks, paints, plastics master batches, wire and cable etc.

Carbon Black is made of fine particles of amorphous carbon and is produced by partial combustion of petroleum or natural gas.

Typical Characteristics
Unit K-354 N-220 N-330 N-339 N-550
Iodine Adsorption g/kg 65 - 75 121 +/- 5 82 +/- 5 90 +/- 5 43 +/- 5
CTAB Surface Area m2/g - 111 +/- 7 83 +/- 6 95 +/- 6 42 +/- 5
DBP Absorption cm3/100g 90 - 108 114 +/- 5 102 +/- 5 120 +/- 5 121 +/- 5
pH Value 3.7 - 4.5 6 - 9 6 - 9 6 - 9 6 - 9
Heating Loss at 125°C % max 1.5* 1.0 1.0 1.0 1.0
Ash Content % max 0.05 0.45 0.45 0.45 0.45
Sieve Residue % max 0.1 - 0.001 0.1 - 0.001 0.1 - 0.001 0.1 - 0.001 0.1 - 1.001
Sulfur Content % max - 1.1 1.1 1.1 1.1
Toluene Discoloration % min - 90 90 90 85
Pour Density kg/m3 - 330 340 320 330
Fine Content % max 6 15 15 15 15
Nitrogen Surface Area m2/g 150 - - - -
Physical Form Granule Dry Pellet Dry Pellet Dry Pellet Dry Pellet
* indicates Heating Loss at 105°C
Unit N-660 N-762 N-765 N-772
Iodine Adsorption g/kg 36 +/- 5 30 +/- 5 25 - 35 28 +/- 4
CTAB Surface Area m2/g 36 +/- 5 25 - 33 - 29 - 37
DBP Absorption cm3/100g 90 +/- 5 65 +/- 4 110 - 120 65 +/- 5
pH Value 6 - 9 9 - 11 7 - 9 9 - 11
Heating Loss at 125°C % max 1.0 0.3 0.9 0.3
Ash Content % max 0.45 0.5 0.45 0.4
Sieve Residue 35 mesh % max 0,1 - 0,001 0.0001 0.001 0.0001
Sieve Residue 325 mesh 0.005 0.1 0.005
Sulfur Content % max 1.1 0.1 - 0.1
Toluene Discoloration % min 80 70 - 70
Pour Density kg/m3 375 480 365 - 395 460
Fine Content % max 15 7 - 7
Nitrogen Surface Area m2/g - 30 +/- 5 - 30 +/- 5
Physical Form Dry Pellet Dry Pellet Wet Pellet Dry Pellet
* indicates Heating Loss at 105°C
Unit N-774 N-990 N-991
Iodine Adsorption g/kg 29 +/- 4 8 +/- 4 8 +/- 4
CTAB Surface Area m2/g 25 - 33 7 7
DBP Absorption cm3/100g 72 +/- 4 35 +/- 5 35 +/- 5
pH Value 9 - 11 7 - 11 7 - 11
Heating Loss at 125°C % max 0.3 0.01 0.01
Ash Content % max 0.5 0.5 0.5
Sieve Residue 35 mesh % max 0.0001 0.0001 0.001
Sieve Residue 325 mesh 0.005 0.002 0.02
Sulfur Content % max 0.1 0.1 0.1
Toluene Discoloration % min 70 80 80
Pour Density kg/m3 490 550 550
Fine Content % max 7 8 -
Nitrogen Surface Area m2/g 30 +/- 5 9 - 11 9 - 11
Physical Form Dry Pellet Granule Powder

Manganese Sulphate

Stellar Exports Offers Finest Quality of Manganese Sulphate Monohydrate for Fertilizer & Feed Additives.

Molecular Formula : MnSO4H2O

Molecular Weight : 169.02

C.A.S. No. : 10034-96-5

Product Group : Inorganic Sulphate

Physical Characteristics

Description : White to Pale Pink Powder

Odor : Odorless

Solubility : Soluble in Water
Incompatible with Strong Acid

Technical Data
  • Bulk Density
  • Dissolution Test (10% Solutiuon)

Complete Purity Profile

Assay (Dry Basic) : 98.5% min(T)

Mn Content : 32.00% min

Chlorides : 0.04% max

Iron : 0.01% max

Lead : 15 ppm max

Arsenic : 2 ppm max

Antimony : 0.00151% max

Mercury : 0.5 ppm max

Insoluble Matter : 0.10 % max

Organic Impurities : Nil

Moisture : 1.00 % max

Application
  • Feed Additives
  • Fetilizers

Acetic Acid

Stellar Exports Offers Acetic Acid  (Glacial) used in Textile Processing & Printing.

Specifications

Acetic Acid (Glacial) : 99.85 % min. by wt.

Water : 00.15% max.

Colour : 10 APHA max.

Formic Acid : 0.05 % max. by wt.

Acetaldehyde : 0.05% max. by wt.

Heavy Metals as Pb : Less than 2 ppm

Iodides : 40 ppb max.

Permanganate : 2.00 hrs. min.

Freezing Point : 16.4 deg C

Specific Gravity : 1.049 at 25 deg C

CAS No. : 64-19-7

UN No. : 2789

Uses

Chemicals

  • Acetic Anhydride
  • Vinyl Acetate Monomer(VAM)
  • Purified Terephthalic Acid(PTA)
  • Monochloro Acetic Acid
  • Acetates
  • Diketene Derivatives

Dyes & Dye Intermediates

  • Acetic Acid is used in textile industries for textile processing and printing.

Ferric Chloride

Ferric Chloride, also know as Iron(III) chloride, and Iron chloride, is an industrial scale commodity chemical compound. Its chemical formula is FeCl3 and its CAS is 7705-08-0. When dissolved in water, the compound undergoes hydrolysis resulting in a brown highly corrosive, acidic solution that is used as a flocculent in sewage treatment and drinking water production. Anhydrous iron(III) chloride is a strong Lewis acid that is used as a catalyst in organic synthesis.

The most common use of ferric chloride is in solution. When dissolved it forms a light brown aqueous solution with a faint hydrochloric acid odor. It is highly corrosive to most metals and probably corrosive to tissue. It is noncombustible and primarily used in sewage treatment and water purification.

Industrial uses include the manufacture of pigments, plating agents and surface treating agents, process regulators, and solids separation agents.

Ferric chloride is produced industrially by a process called direct chlorination, the reaction of dry chlorine with scrap iron at 500-700 degrees Centigrade.

SPECIFICATION ( IS : 711–1970 )
CAS NO. 7705-08-0
SYSTEMATIC NAME Ferric Chloride
OTHER NAME Iron(III) chloride, Iron tri chloride, Ferric Trichloride Anhydrous
EMPIRICAL FORMULA FeCl3
MOLECULAR WT 162.2 g/mol
APPEARANCE Dark Greenish Black, Crystalline Powder Extremely hygroscopic
SPECIFICATIONS Ferric Chloride ( as FeCl3 )
Matter Insoluble in water
Free Chlorine ( as Cl )
Ferrous Salts ( as Fecl2 )
Sulphates (as SO4 )
Nitrates (as NO3 )
Copper ( as Cu )
Zinc ( as Zn )
Arsenic ( as As2O3 )
Alkalis and Alkaline earths
SPECIFICATION ( IS : 711–1970 )
CAS NO. 10025-77-1
SYSTEMATIC NAME Ferric Chloride Hexahydrate
OTHER NAME Iron (III) Chloride, Iron tri Chloride
EMPIRICAL FORMULA FeCl3 6H2O
MOLECULAR WT 270.3 g/mol
APPEARANCE Brownish-yellow solid
SPECIFICATIONS Ferric Chloride Hexahydrate (as FeCl3 6H2O)
Ferric Chloride ( as Fecl3 )
Free Acid ( as HCL )
Free Chlorine ( as Cl )
Insoluble Matter
Ferrous Salts ( as Fecl2 )
Sulphates ( as SO4 )
Nitrates ( as NO3 )
Copper (as Cu)
Zinc ( as Zn )
Arsenic ( as As2O3 )
Alkalis and Alkaline earths
SPECIFICATION ( IS : 711–1970 )
CAS NO. 7705-08-0
SYSTEMATIC NAME Ferric Chloride
OTHER NAME Iron(III) chloride, Iron tri chloride
EMPIRICAL FORMULA FeCl3
MOLECULAR WT 162.2 g/mol
APPEARANCE Dark brown liquid
SPECIFICATIONS Ferric Chloride ( as FeCl3 )
Specific gravity
Insoluble matter
Free Acid ( as HCL )
Free Chlorine ( as Cl )
Ferrous Salts ( as Fecl2 )
Sulphates (as SO4 )
Nitrates (as NO3 )
Copper ( as Cu )
Zinc ( as Zn )
Arsenic ( as As2O3 )
Alkalis and Alkaline earths

Aluminium Sulphate (Ferric & Non Ferric)

Aluminum sulphate, normally recognized as alum is solid crystalline powder or strong that is dissolvable in water. It includes over 17% alumina (Al2O3). This is produced in a straightforward procedure from sulphuric acid and aluminum trihydrate. Humans like an astringent in coloring have employed our product. Paper industry uses our aluminum sulphate in paper estimating to enhance ink receptivity and durability. Where as in water industry, it is deployed to purify liquid by expelling the contaminants. Different utilizations incorporate like a pH agent in soil, like a waterproofing substance and quickening agent in cement.


Uses
  • Deployed for water purification. As a mordant in printing and dyeing textiles
  • Sometimes utilized to lessen the pH level of garden soil
  • In paper, forming the reaction of alum with rosin sizes of different sorts, joining the recently framed rosin aluminates to strands. Measuring makes the paper water safe
  • Additionally utilized as a part of styptic pencils
ALUMINIUM SULPHATE (FERRIC ALUM)

Appearance : Solid Necked slab

Alumina Content as Al2O3 : 15% min

Iron as Fe : 0.7% max

Insoluble in water : 0.5% max

PH @ 5% sol : 2-3

ALUMINIUM SULPHATE (NON-FERRIC ALUM)

Physical Appearance : Lumps 1-4

Physical Appearance : powder (ISS MESH) 80, 100, 120, 150, 200 MESH

Alumina Content as AIL : 17% min

Iron as Fe : 100ppm max

Insoluble matter in water : 0.3% max

PH @ 5% SOI : 2.8 min

Aluminium Sulphate

Appearance : WHITE POWDER

Application : Industrial

Ingredients : ALUMINIUM SULPHATE

Shelf Life : 2 Years

pH Level : 2.9

Shape : other

Melting Point : 94

Molecular Weight : 453 Grams (g)

Molecular Formula : AL2(SO4)3

Properties : FINE POWDER ( 150-200 MESH)

Density : 1.65 Kilogram per litre (kg/L)

Product Type : NON FERRIC ALUMINUM SULPHATE FINE POWDER

Purity : 99 %

Physical Form : Powder


POLY ALUMINIUM CHLORIDE (PAC)

Polyaluminium chlorides are synthetic polymers dissolved in water. They react to form insoluble aluminium poly-hydroxides which precipitate in big volumetric flocs. The flocs absorb suspended pollutants in the water which are precipitated with the PAC and can together be easily removed.

PAC can be used as a flocculant for all types of water treatment treatment, drinking water, industrial waste water, urban waste water and in the paper industry.


SPECIFICATIONS
Sr. Characteristic Unit PAC 10
MB HB
1. Appearance Clear Pale Yellow
Liq. Liq.
2. Aluminium as Al2O3 % by Mass 10.0 + 0.5 10.5 + 0.3
3. Basicity % by Mass 40.0 + 5.0 64 (Min)
4. Chloride as Cl- % by Mass 11.5 + 1.0 9.5 + 1.0
5. Sulphate as SO4, (Max) % by Mass 2.7 2.5
6. Specific Gravity at 25oC 1.2 + 0.04 1.2 + 0.02
7. Bulk Density gm/ml NA NA
8. Insolubles, Max % by Mass 0.5 0.5
9. pH of 5% Solution w/v 1.8 - 4.5 2.5 - 4.5
Sr. Characteristic Unit PAC 14
Pale Yellow
1. Appearance Pale Yellow
Liq.
2. Aluminium as Al2O3 % by Mass 13.5 + 0.5
3. Basicity % by Mass -
4. Chloride as Cl- % by Mass 20.5 + 1.5
5. Sulphate as SO4, (Max) % by Mass Nil
6. Specific Gravity at 25oC 1.32 + 0.02
7. Bulk Density gm/ml NA
8. Insolubles, Max % by Mass -
9. pH of 5% Solution w/v 1.8 - 4.5
PECIFICATIONS
Sr. Characteristic Unit PAC 18
Pale Yellow
1. Appearance Clear Pale Yellow
Liq.
2. Aluminium as Al2O3 % by Mass 17.5 + 1.0
3. Basicity % by Mass 45.0 + 5.0
4. Chloride as Cl- % by Mass 20.5 + 1.5
5. Sulphate as SO4, (Max) % by Mass Nil
6. Specific Gravity at 25oC 1.37 + 0.02
7. Bulk Density gm/ml NA
8. Insolubles, Max % by Mass -
9. pH of 5% Solution w/v 1.8 - 4.5
SPECIFICATIONS
Sr. Characteristic Unit PAC 30
MB HB
1. Appearance Pale Yellow Pale Yellow
Powder Powder
2. Aluminium as Al2O3 % by Mass 29.0 + 1.0 29.0 + 1.0
3. Basicity % by Mass 40.0 + 5.0 64 (Min)
4. Chloride as Cl- % by Mass 33.0 + 2.0 29.0 + 2.0
5. Sulphate as SO4, (Max) % by Mass 10 10
6. Specific Gravity at 25oC NA NA
7. Bulk Density gm/ml 0.65 (Min) 0.65 (Min)
8. Insolubles, Max % by Mass 1.5 1.5
9. pH of 5% Solution w/v 1.8-4.5 2.5-4.5

Monochloro Acetic Acid

Monochloroacetic Acid is used as a versatile intermediate in the manufacturing of various agrochemicals. It is widely used as the main raw material in various pharma products and in the manufacturing of Carboxy Methyl Cellulose.


White Deliquescent Crystals
Monochloroacetic acid (NLT) 99.25 %
Dichloroacetic Acid (NMT) 00.50%
Acetic Acid (NMT) 00.25%
Moisture (NMT) 00.50%
Iron (NMT) 10 ppm
Heavy Metal (as Pb) (NMT) 10 ppm

SODIUM SALT OF MONOCHLORO ACETATE (SMCA)

It is used in the manufacture of Sodium CMC – Carboxy Methyl Starch – Guar Gum  - Dyes etc

White free flowing powder
SMCA Purity on dry basis 98 % min
Sodium Chloride 1 % max
Sodium Dichloro Acetate 0.5 % max
Sodium Glycolate 0.3 % max
Free Monochlroacetic 0.2 % max
Moisture 2.0 % max
pH of 5 % solution 6 to 8

Trichloro Acetic Acid (TCAA)

Used as an  intermediate in Pharmaceuticals , Textile Auxilaries and manufacture of Ester.

White Deliquescent Crystals
Trichloroacetic Acid (NLT) 98 %
Nomochloroacetic Acid (NMT) 01.00%
Dichloroacetic Acid (NMT) 01.00%
Moisture (NMT) 00.50%
Iron (NMT) 10 ppm
Heavy Metal (as Pb) (NMT) 10 ppm

Tri Sodium Phosphate

Trisodium phosphate (TSP) is the inorganic compound with the chemical formula Na3PO4. It is a white, granular or crystalline solid, highly soluble in water, producing an alkaline solution.

Trisodium phosphate and other sodium phosphate additives have multiple uses in the food industry and are found in many commercially prepared products. They are used to decrease acidity and improve texture in baked foods and meats.


Technical Specifications
A Product Tri Sodium Phosphate Dodecahydrate
01 Chemical Formula Na3PO4 12H2O
02 Molecular Weight 380
03 Grade Technical
04 Form Milky / Water White Crystal
B Specification Standard BPPL
01 P2O5 minimum 17.50 % 17.60 %
02 Matter insoluble in Water Max. 0.20 % 0.10 %
03 Carbonate Alkalinity Max. 3.00 % < 3.00 %
04 Total Alkalinity Max. 4.50 % < 4.50 %
05 Soluble Iron Compounds Max. 0.009 % < 0.009 %
06 Soluble Silica Max. 0.1 % < 0.1 %
07 Chloride Max. 0.1 % < 0.1 %
A Product Tri Sodium Phosphate Anhydrous
01 Chemical Formula Na3PO4
02 Molecular Weight 164
03 Grade 164
04 Form White Powder
B Specification Standard BPPL
01 P2O5 minimum *41.00 % *41.00 %
02 Matter insoluble in Water Max. 0.50 % 0.30 %
03 Carbonates (as Na2CO3) Max. 2.00 % < 1.00 %
04 Free Sodium Hydroxide (as NaOH) Max. 4.50 % < 4.50 %
05 Soluble Iron Compounds Max. 0.0200 % < 0.0100 %
06 Soluble Silica Max. 0.1 % < 0.1 %
07 Chloride Max. 0.1 % < 0.1 %

Tapioca Starch Powder

Tapioca flour / starch can be supplied for the paper, textile, pharma, adhesive and food industries. We can also supply tailor made modified starches.

We believe that purity is an important parameter in being competitive. We can also supply to suit customer requirement on application and process requirement.


Technical Specifications
Parametters A Grade Food Grade
Appearance White Colour Free Flowing Powder White Colour Free Flowing Powder
Cleanliness Negligible Dirt, Grit and Foreign Matter Negligible Dirt, Grit and Foreign Matter
pH of 10% Slurry 5.0 to 7.0 5.0 to 7.0
Moisture (% w/w) 13.0 Max. 12.0 Max.
Acid Factor (ml) 3.0 ml Max. 3.0 ml Max.
Viscosity of 2% Solution in Redwood No. 1 Viscometer @ 50°C 50 Sec. Min. 50 Sec. Min.
Plub and Fiber 1.0 ml Max. 0.5 ml Max.
Starch Content (%DB) 99.0 Min. 99.0 Min.
Sulphur Dioxide 100 ppm Max. 50 ppm Max.
TPC 50000 cfu Max.
Coli Forms 100 Max.
Yeast and Moulds 2000 cfu Max.
E Coli (25 Grams) Absent
Salmonella (25 Grams) Absent
Aflatoxin 30 ppb

Agar Agar Powder

Agar agar is derived from seaweeds of the class RHODOPJHYCEAE.

Agar agar is used in a number of applications in Microbiology, Food technology, Biotechnology, Pharmaceuticals and Dentistry. It acts as a thickening, stabilizing & gelling agent.

We are offering all types of agar agar namely Food grade, Pharmaceutical & Bacteriological.


AGAR AGAR FOOD GRADE SPECIFICATIONS
Parameters 600 GS 800 GS 900 GS 1000 GS
Clarity Clear Clear Clear Clear
Moisture 15% Max 15% Max 15% Max 15% Max
pH 6.0-7.5 6.0-7.5 6.0-7.5 6.0-7.5
ASH < 3% < 3% < 3% < 3%
Gel Strength 600-650 GM/CM2 800-850 GM/CM2 900-950 GM/CM2 1000-1050 GM/CM2
Gelung Temp. 37-42°C 37-42°C 37-42°C 37-42°C
Melting Temp. 88-95°C 88-95°C 88-95°C 88-95°C
Swelling Index >8 ML >8 ML >8 ML >8 ML
Water Absorption 55-68 ML 55-68 ML 55-68 ML 55-68 ML
Gelatin Passes Test Passes Test Passes Test Passes Test
Extraneous Matter < 0.5% < 0.5% < 0.5% < 0.5%
Starch NIL NIL NIL NIL
Acid Insoluble Ash < 0.5% < 0.5% < 0.5% < 0.5%
Total Colony Count < 1000 cfu/gm < 1000 cfu/gm < 1000 cfu/gm < 1000 cfu/gm
Enterobacteriaceae Absent Absent Absent Absent
Coliform Bacteria Absent Absent Absent Absent
Salmonella NIL NIL NIL NIL
E.Coli NIL NIL NIL NIL
Mold < 100 < 100 < 100 < 100
Yeast < 100 < 100 < 100 < 100
AGAR AGAR SPREADABLE GEL SPECIFICATIONS
Parameters U.M. Gel-30 Gel-50 Gel-100 Gel-200
(Limits) (Limits) (Limits) (Limits)
Ash % < 5.0 < 5.0 < 5.0 < 5.0
Insoluble ash in HCl % < 0.10 < 0.10 < 0.10 < 0.10
Loss on drying % < 18.00 < 18.00 < 18.00 < 18.00
Particle Size % 100% pass 80 mesh 100% pass 80 mesh 100% pass 80 mesh 100% pass 80 mesh
Get Strength 100°C gr/cm2 30-50 50-80 100-150 200-250
Turbidity NTU 10.00-30.00 10.00-30.00 10.00-30.00 10.00-30.00
pH Solution1.5% 5.00-7.50 5.00-7.50 5.00-7.50 5.00-7.50
Gelatine & Protein % Not Detactable Not Detactable Not Detactable Not Detactable
Starch % Not Detactable Not Detactable Not Detactable Not Detactable
Total Heavy Metals as Pb ppm < 10.00 < 10.00 < 10.00 < 10.00
Lead ppm < 5.00 < 5.00 < 5.00 < 5.00
Cadmium ppm < 1.00 < 1.00 < 1.00 < 1.00
Mercury ppm < 1.00 < 1.00 < 1.00 < 1.00
Arsenic ppm < 3.00 < 3.00 < 3.00 < 3.00
Total Plate Count UFC/g < 1000 < 1000 < 1000 < 1000
Yeast & Moulds UFC/g < 100 < 100 < 100 < 100
Coliforms UFC/g Absent in 0.10 g Absent in 0.10 g Absent in 0.10 g Absent in 0.10 g
E Coli UFC/g Absent in 20 g Absent in 20 g Absent in 20 g Absent in 20 g
Salmonella UFC/g Absent in 20 g Absent in 20 g Absent in 20 g Absent in 20 g

Sodium Carboxymethyl Cellulose

CMC is an anionic water soluble polymer derived from the world’s most abundant polymer – cellulose. It functions as a thickener, binder, stabilizer, protective colloid, suspending agent, gelling agent, and flow control agent. This makes it suitable for use in a variety of industries.

In addition, our products represent a comprehensive range of CMC and PAC grades to control fluid loss and provide rheology to the oil and gas drilling industry.


Sr. No. Tests Standard
1 Description White or almost white, granular powder, odorless or almost odorless, hygroscopic
2 Solubility Practically insoluble in acetone, in ether and in toluene. It is easily dispersed in water forming a colloidal solution
3 Identification (A) Blue, cotton-like precipitate is formed with copper sulphate solution
(B) Boil 5 ml of solution for few minutes. No precipitate formed
(C) Give the reaction of sodium salts
4 pH (1% Solution) 6.0 to 8.0
5 Apparent Viscosity (25°C) 75% and 140% of the declared value
6 Arsenic NMT 1 ppm
7 Heavy Metal NMT 20 ppm
8 Chloride NMT 0.25%
9 Loss on Drying NMT 10.0%
10 Sulphated Ash 20.0% to 33.3%
11 Assay (on Dry Basis) 6.5% to 10.8%